SEM206P Temperature Transmitter

Brand: Status Instruments

The SEM206/P is a cost effective "smart" in head transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial 4-20 mA transmission signal.

 PC configuration allows the user to select Range, units and Burnout direction, without requiring calibration equipment. 

Configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the SEM206/P loop terminals and following the software instructions. 

Calibration set up may be saved as a file on the PC for later use. 

The SEM206/P in head transmitter incorporates the latest digital technology to ensure accurate drift free performance.

Specifications

Accuracy

  • (mA Output/2,000) or 5 μA whichever is greater
  • Measurement Accuracy: 0.2° C (0.36° F) ± 0.05% of Reading

Approvals & Certifications

  • EMC - BS EN 61326

Configuration

  • USB

Current

  • Excitation Current: < 200 μA

Humidity

  • Ambient: 10 to 90% Non-Condensing Relative Humidity

Linearization

  • BS EN 60751(IEC 751)
  • JISC 1604

Operating Temperature

  • -40° to 85° C (-40° to 185° F)

Output

  • 4-20 mA Current Loop
  • Maximum
  • Minimum < 3.9 mA (In Low Burn-out Condition)

Power Supply

  • 10-30 Vdc

Power Supply Effect

  • Loop Voltage Effect: 0.2 μA/V

Resistance

  • 18 to 390 ohms - Sensor Range (Input)
  • Maximum

Resistance Effect

  • Lead Resistance Effect: 0.002° C/Ohm

Response Time

  • 1 second

Sensor, Probe Connection

  • 2-Wire
  • 3-Wire
  • Screw Terminal

Sensor, Probe Type

  • Pt100

Span - Minimum

  • 25° C (77° F)

Storage Temperature

  • -50° to 90° C (-58° to 194° F)

System Requirements

  • Windows XP

Temperature Range

  • Sensor: -195° to 845° C (-319° to 1,553° F)

Thermal Drift

  • ± 0.02° C / °C (Input)
  • 2 μA / °C (Output)

Turn-On Time

  • Start Up Time: 4 seconds

Update Time

  • 500 milliseconds
  • Warm-Up Time: 1 Minute to Full Accuracy

Show More