STA206 Temperature Transmitter

Brand: Status Instruments

The STA206 is a cost effective sensor and transmitter assembly housed in a 316 Stainless Steel body with an integral Pt100 sensor, transmitter and DIN connector. 

The integrated temperature transmitter is based around our SEM206P. 

PC configuration allows the user to select Range, units and Burnout direction, without requiring calibration equipment. 

Configuration is performed quickly using our USB port driven configurator by simply connecting two clips to the STA206 loop terminals and following the software instructions. 

Calibration set up may be saved as a file on the PC for later use. 

The STA206 incorporates the latest digital technology to ensure accurate drift free performance.

Specifications

Accuracy

  • 0.2° C (0.36° F) ± 0.05% of Reading Plus Sensor Error

Approvals & Certifications

  • EMC BS EN 61326

BSP Connection

  • 1/2" BSP Male

Communication

  • Digital Technology

Configuration

  • USB Port

Current

  • < 200 μA - Excitation Current

Enclosure, Body Material

  • 316 Stainless Steel

Length

  • 50 to 150 mm - Immersion Length

Linearization

  • BS EN 60751 (IEC751)

Operating Temperature

  • -50° to 200° C (-58° to 392° F)

Output

  • < 3.9 mA - Minimum Output (In Low Burn-out Condition)
  • 21.5 mA - Maximum
  • 2-Wire Current Loop
  • 4-20 mA

Output Load

  • (Vsupply-10) / 21 KiloOhms, Maximum

Power Supply

  • 10-30 Vdc

Response Time

  • 1 second + Sensor Lag

Sensor Protection

  • Burn-out

Sensor, Probe Connection

  • DIN Connector Screw Terminal

Sensor, Probe Type

  • Pt100 Class A

Span - Minimum

  • 25° C (77° F)

Thermal Drift

  • 0.0025% / °C

Turn-On Time

  • 4 seconds (Output < 4 mA During Start Up)

Update Time

  • 1 Minute to Full Accuracy - Warm-Up
  • 500 milliseconds

Show More